inglês para português Tecn./Engenharia Engenharia: Industrial Edge banding machine

Refer to drawing 2, when workpiece is moving forward along location board, limit switch control air cylinder to push roller and feeding roller to nip the sealing band to move forward, when exceed the first pressure band roller tangent about 30~40mm, the roller will be back.

Edge sealing band goes through the adjustment toolpost on cutter, adjust according to the height of edge sealing band, as drawing 10 and drawing 11. Loose screw 1, adjust screw 2 to make the edge sealing band go through two ends freely, tighten screw 1. Limit switch controls cutter air cylinder to cut off edge sealing band automatically.